Opus Custom is an optional part of the Opus specification and reference implementation which uses a distinct API from the regular API and supports frame sizes that are not normally supported. Use of Opus Custom is discouraged for all but very special applications for which a frame size different from 2.5, 5, 10, or 20 ms is needed (for either complexity or latency reasons) and where interoperability is less important. More...

Typedefs
typedef struct OpusCustomEncoder	OpusCustomEncoder
	Contains the state of an encoder. More...

typedef struct OpusCustomDecoder	OpusCustomDecoder
	State of the decoder. More...

typedef struct OpusCustomMode	OpusCustomMode
	The mode contains all the information necessary to create an encoder. More...

Functions
OpusCustomMode *	opus_custom_mode_create (opus_int32 Fs, int frame_size, int *error)
	Creates a new mode struct. More...

void	opus_custom_mode_destroy (OpusCustomMode *mode)
	Destroys a mode struct. More...

int	opus_custom_encoder_get_size (const OpusCustomMode *mode, int channels)
	Gets the size of an OpusCustomEncoder structure. More...

OpusCustomEncoder *	opus_custom_encoder_create (const OpusCustomMode mode, int channels, int error)
	Creates a new encoder state. More...

void	opus_custom_encoder_destroy (OpusCustomEncoder *st)
	Destroys a an encoder state. More...

int	opus_custom_encode_float (OpusCustomEncoder st, const float pcm, int frame_size, unsigned char *compressed, int maxCompressedBytes)
	Encodes a frame of audio. More...

int	opus_custom_encode (OpusCustomEncoder st, const opus_int16 pcm, int frame_size, unsigned char *compressed, int maxCompressedBytes)
	Encodes a frame of audio. More...

int	opus_custom_encoder_ctl (OpusCustomEncoder *OPUS_RESTRICT st, int request,...)
	Perform a CTL function on an Opus custom encoder. More...

int	opus_custom_decoder_get_size (const OpusCustomMode *mode, int channels)
	Gets the size of an OpusCustomDecoder structure. More...

int	opus_custom_decoder_init (OpusCustomDecoder st, const OpusCustomMode mode, int channels)
	Initializes a previously allocated decoder state The memory pointed to by st must be the size returned by opus_custom_decoder_get_size. More...

OpusCustomDecoder *	opus_custom_decoder_create (const OpusCustomMode mode, int channels, int error)
	Creates a new decoder state. More...

void	opus_custom_decoder_destroy (OpusCustomDecoder *st)
	Destroys a an decoder state. More...

int	opus_custom_decode_float (OpusCustomDecoder st, const unsigned char data, int len, float *pcm, int frame_size)
	Decode an opus custom frame with floating point output. More...

int	opus_custom_decode (OpusCustomDecoder st, const unsigned char data, int len, opus_int16 *pcm, int frame_size)
	Decode an opus custom frame. More...

int	opus_custom_decoder_ctl (OpusCustomDecoder *OPUS_RESTRICT st, int request,...)
	Perform a CTL function on an Opus custom decoder. More...

Detailed Description

Opus Custom is an optional part of the Opus specification and reference implementation which uses a distinct API from the regular API and supports frame sizes that are not normally supported. Use of Opus Custom is discouraged for all but very special applications for which a frame size different from 2.5, 5, 10, or 20 ms is needed (for either complexity or latency reasons) and where interoperability is less important.

In addition to the interoperability limitations the use of Opus custom disables a substantial chunk of the codec and generally lowers the quality available at a given bitrate. Normally when an application needs a different frame size from the codec it should buffer to match the sizes but this adds a small amount of delay which may be important in some very low latency applications. Some transports (especially constant rate RF transports) may also work best with frames of particular durations.

Libopus only supports custom modes if they are enabled at compile time.

The Opus Custom API is similar to the regular API but the opus_encoder_create and opus_decoder_create calls take an additional mode parameter which is a structure produced by a call to opus_custom_mode_create. Both the encoder and decoder must create a mode using the same sample rate (fs) and frame size (frame size) so these parameters must either be signaled out of band or fixed in a particular implementation.

Similar to regular Opus the custom modes support on the fly frame size switching, but the sizes available depend on the particular frame size in use. For some initial frame sizes on a single on the fly size is available.

Typedef Documentation

◆ OpusCustomDecoder

typedef struct OpusCustomDecoder OpusCustomDecoder

State of the decoder.

One decoder state is needed for each stream. It is initialized once at the beginning of the stream. Do not re-initialize the state for every frame.

Decoder state

◆ OpusCustomEncoder

typedef struct OpusCustomEncoder OpusCustomEncoder

Contains the state of an encoder.

One encoder state is needed for each stream. It is initialized once at the beginning of the stream. Do not re-initialize the state for every frame.

Encoder state

◆ OpusCustomMode

typedef struct OpusCustomMode OpusCustomMode

The mode contains all the information necessary to create an encoder.

Both the encoder and decoder need to be initialized with exactly the same mode, otherwise the output will be corrupted.

Mode configuration

Function Documentation

◆ opus_custom_decode()

int opus_custom_decode	(	OpusCustomDecoder *	st,
		const unsigned char *	data,
		int	len,
		opus_int16 *	pcm,
		int	frame_size
	)

Decode an opus custom frame.

Parameters

[in]	st	`OpusCustomDecoder*`: Decoder state
[in]	data	`char*`: Input payload. Use a NULL pointer to indicate packet loss
[in]	len	`int`: Number of bytes in payload
[out]	pcm	`opus_int16`: Output signal (interleaved if 2 channels). length is frame_sizechannels*sizeof(opus_int16)
[in]	frame_size	Number of samples per channel of available space in *pcm.

Returns: Number of decoded samples or Error codes

◆ opus_custom_decode_float()

int opus_custom_decode_float	(	OpusCustomDecoder *	st,
		const unsigned char *	data,
		int	len,
		float *	pcm,
		int	frame_size
	)

Decode an opus custom frame with floating point output.

Parameters

[in]	st	`OpusCustomDecoder*`: Decoder state
[in]	data	`char*`: Input payload. Use a NULL pointer to indicate packet loss
[in]	len	`int`: Number of bytes in payload
[out]	pcm	`float`: Output signal (interleaved if 2 channels). length is frame_sizechannels*sizeof(float)
[in]	frame_size	Number of samples per channel of available space in *pcm.

Returns: Number of decoded samples or Error codes

◆ opus_custom_decoder_create()

OpusCustomDecoder* opus_custom_decoder_create	(	const OpusCustomMode *	mode,
		int	channels,
		int *	error
	)

Creates a new decoder state.

Each stream needs its own decoder state (can't be shared across simultaneous streams).

Parameters

[in]	mode	`OpusCustomMode`: Contains all the information about the characteristics of the stream (must be the same characteristics as used for the encoder)
[in]	channels	`int`: Number of channels
[out]	error	`int*`: Returns an error code

Returns: Newly created decoder state.

◆ opus_custom_decoder_ctl()

int opus_custom_decoder_ctl	(	OpusCustomDecoder *OPUS_RESTRICT	st,
		int	request,
			...
	)

Perform a CTL function on an Opus custom decoder.

Generally the request and subsequent arguments are generated by a convenience macro.

See also: Generic CTLs

◆ opus_custom_decoder_destroy()

void opus_custom_decoder_destroy ( OpusCustomDecoder * st )

Destroys a an decoder state.

Parameters

[in] st OpusCustomDecoder*: State to be freed.

◆ opus_custom_decoder_get_size()

int opus_custom_decoder_get_size	(	const OpusCustomMode *	mode,
		int	channels
	)

Gets the size of an OpusCustomDecoder structure.

Parameters

[in]	mode	`OpusCustomMode *`: Mode configuration
[in]	channels	`int`: Number of channels

Returns: size

◆ opus_custom_decoder_init()

int opus_custom_decoder_init	(	OpusCustomDecoder *	st,
		const OpusCustomMode *	mode,
		int	channels
	)

Initializes a previously allocated decoder state The memory pointed to by st must be the size returned by opus_custom_decoder_get_size.

This is intended for applications which use their own allocator instead of malloc.

See also: opus_custom_decoder_create(),opus_custom_decoder_get_size() To reset a previously initialized state use the OPUS_RESET_STATE CTL.

Parameters

[in]	st	`OpusCustomDecoder*`: Decoder state
[in]	mode	`OpusCustomMode *`: Contains all the information about the characteristics of the stream (must be the same characteristics as used for the encoder)
[in]	channels	`int`: Number of channels

Returns: OPUS_OK Success or Error codes

◆ opus_custom_encode()

int opus_custom_encode	(	OpusCustomEncoder *	st,
		const opus_int16 *	pcm,
		int	frame_size,
		unsigned char *	compressed,
		int	maxCompressedBytes
	)

Encodes a frame of audio.

Parameters

[in]	st	`OpusCustomEncoder*`: Encoder state
[in]	pcm	`opus_int16*`: PCM audio in signed 16-bit format (native endian). There must be exactly frame_size samples per channel.
[in]	frame_size	`int`: Number of samples per frame of input signal
[out]	compressed	`char *`: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long.
[in]	maxCompressedBytes	`int`: Maximum number of bytes to use for compressing the frame (can change from one frame to another)

Returns: Number of bytes written to "compressed". If negative, an error has occurred (see error codes). It is IMPORTANT that the length returned be somehow transmitted to the decoder. Otherwise, no decoding is possible.

◆ opus_custom_encode_float()

int opus_custom_encode_float	(	OpusCustomEncoder *	st,
		const float *	pcm,
		int	frame_size,
		unsigned char *	compressed,
		int	maxCompressedBytes
	)

Encodes a frame of audio.

Parameters

[in]	st	`OpusCustomEncoder*`: Encoder state
[in]	pcm	`float*`: PCM audio in float format, with a normal range of +/-1.0. Samples with a range beyond +/-1.0 are supported but will be clipped by decoders using the integer API and should only be used if it is known that the far end supports extended dynamic range. There must be exactly frame_size samples per channel.
[in]	frame_size	`int`: Number of samples per frame of input signal
[out]	compressed	`char *`: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long.
[in]	maxCompressedBytes	`int`: Maximum number of bytes to use for compressing the frame (can change from one frame to another)

Returns: Number of bytes written to "compressed". If negative, an error has occurred (see error codes). It is IMPORTANT that the length returned be somehow transmitted to the decoder. Otherwise, no decoding is possible.

◆ opus_custom_encoder_create()

OpusCustomEncoder* opus_custom_encoder_create	(	const OpusCustomMode *	mode,
		int	channels,
		int *	error
	)

Creates a new encoder state.

Each stream needs its own encoder state (can't be shared across simultaneous streams).

Parameters

[in]	mode	`OpusCustomMode*`: Contains all the information about the characteristics of the stream (must be the same characteristics as used for the decoder)
[in]	channels	`int`: Number of channels
[out]	error	`int*`: Returns an error code

Returns: Newly created encoder state.

◆ opus_custom_encoder_ctl()

int opus_custom_encoder_ctl	(	OpusCustomEncoder *OPUS_RESTRICT	st,
		int	request,
			...
	)

Perform a CTL function on an Opus custom encoder.

Generally the request and subsequent arguments are generated by a convenience macro.

See also: Encoder related CTLs

◆ opus_custom_encoder_destroy()

void opus_custom_encoder_destroy ( OpusCustomEncoder * st )

Destroys a an encoder state.

Parameters

[in] st OpusCustomEncoder*: State to be freed.

◆ opus_custom_encoder_get_size()

int opus_custom_encoder_get_size	(	const OpusCustomMode *	mode,
		int	channels
	)

Gets the size of an OpusCustomEncoder structure.

Parameters

[in]	mode	`OpusCustomMode *`: Mode configuration
[in]	channels	`int`: Number of channels

Returns: size

◆ opus_custom_mode_create()

OpusCustomMode* opus_custom_mode_create	(	opus_int32	Fs,
		int	frame_size,
		int *	error
	)

Creates a new mode struct.

This will be passed to an encoder or decoder. The mode MUST NOT BE DESTROYED until the encoders and decoders that use it are destroyed as well.

Parameters

[in]	Fs	`int`: Sampling rate (8000 to 96000 Hz)
[in]	frame_size	`int`: Number of samples (per channel) to encode in each packet (64 - 1024, prime factorization must contain zero or more 2s, 3s, or 5s and no other primes)
[out]	error	`int*`: Returned error code (if NULL, no error will be returned)

Returns: A newly created mode

◆ opus_custom_mode_destroy()

void opus_custom_mode_destroy ( OpusCustomMode * mode )

Destroys a mode struct.

Only call this after all encoders and decoders using this mode are destroyed as well.

Parameters

[in] mode OpusCustomMode*: Mode to be freed.

Typedefs

Functions

Detailed Description

Typedef Documentation

◆ OpusCustomDecoder

◆ OpusCustomEncoder

◆ OpusCustomMode

Function Documentation

◆ opus_custom_decode()

◆ opus_custom_decode_float()

◆ opus_custom_decoder_create()

◆ opus_custom_decoder_ctl()

◆ opus_custom_decoder_destroy()

◆ opus_custom_decoder_get_size()

◆ opus_custom_decoder_init()

◆ opus_custom_encode()

◆ opus_custom_encode_float()

◆ opus_custom_encoder_create()

◆ opus_custom_encoder_ctl()

◆ opus_custom_encoder_destroy()

◆ opus_custom_encoder_get_size()

◆ opus_custom_mode_create()

◆ opus_custom_mode_destroy()