|
Macros | |
#define | OPUS_AUTO |
Auto/default setting. | |
#define | OPUS_BITRATE_MAX |
Maximum bitrate. | |
#define | OPUS_APPLICATION_VOIP |
Best for most VoIP/videoconference applications where listening quality and intelligibility matter most. | |
#define | OPUS_APPLICATION_AUDIO |
Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input. | |
#define | OPUS_APPLICATION_RESTRICTED_LOWDELAY |
Only use when lowest-achievable latency is what matters most. | |
#define | OPUS_SIGNAL_VOICE 3001 |
Signal being encoded is voice. | |
#define | OPUS_SIGNAL_MUSIC 3002 |
Signal being encoded is music. | |
#define | OPUS_BANDWIDTH_NARROWBAND |
4 kHz bandpass | |
#define | OPUS_BANDWIDTH_MEDIUMBAND |
6 kHz bandpass | |
#define | OPUS_BANDWIDTH_WIDEBAND |
8 kHz bandpass | |
#define | OPUS_BANDWIDTH_SUPERWIDEBAND |
12 kHz bandpass | |
#define | OPUS_BANDWIDTH_FULLBAND |
20 kHz bandpass |
#define OPUS_APPLICATION_AUDIO |
Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input.
#define OPUS_APPLICATION_RESTRICTED_LOWDELAY |
Only use when lowest-achievable latency is what matters most.
Voice-optimized modes cannot be used.
#define OPUS_APPLICATION_VOIP |
Best for most VoIP/videoconference applications where listening quality and intelligibility matter most.
#define OPUS_AUTO |
Auto/default setting.
#define OPUS_BANDWIDTH_FULLBAND |
20 kHz bandpass
#define OPUS_BANDWIDTH_MEDIUMBAND |
6 kHz bandpass
#define OPUS_BANDWIDTH_NARROWBAND |
4 kHz bandpass
#define OPUS_BANDWIDTH_SUPERWIDEBAND |
12 kHz bandpass
#define OPUS_BANDWIDTH_WIDEBAND |
8 kHz bandpass
#define OPUS_BITRATE_MAX |
Maximum bitrate.
#define OPUS_SIGNAL_MUSIC 3002 |
Signal being encoded is music.
#define OPUS_SIGNAL_VOICE 3001 |
Signal being encoded is voice.
For more information visit the Opus Website. |
©2012 Generated on Fri Sep 21 2012 12:06:40 for Opus by doxygen 1.8.1.1 |